Technical Data
| Cable family code |
UTd1GF FiRis
|
| Cable type |
Central loose tube cable
|
| Cable version |
Gel-free installation cable
|
| Cable application |
universal use
|
| CPR classification |
Cca-s1a,d0,a1
|
| DoP number |
D9088
|
| Fiber type |
OM3
|
| Fiber count |
8
|
| Fiber color coding |
1.-12.: red, green, blue, yellow, white, gray, brown, violet, turquoise, black, orange, pink
|
| Fiber count per tube |
12
|
| Loose tube count |
1
|
| Loose tube diameter |
2.8 mm
|
| Armor |
Rodent protection
|
| Outer sheath thickness |
1.2 mm
|
| Outer sheath material |
UV stable FRLSZH
|
| Outer sheath color |
turquoise/aqua
|
| Cable outer diameter |
6.8 mm
|
| Cable weight |
32.0 kg/km / 21 lbs/1000ft
|
| DIN / VDE 0888 code |
U-BQ(ZN)BH
|
| Warranty |
R&Mfreenet
|
| CPR test method |
EN 50575, EN 13501-6
|
| Standard put-up length on drum |
2’100 m ± 5%
|
| CPR classification |
Cca
|
| Minimum bending radius |
no tension - 10 x cable diameter
|
Mechanical Data
| In-service tensile strength |
1000 N
|
| In-service tensile strength acceptance criteria |
Δα ≤ 0,05 dB
|
| In-service tensile strength test method |
IEC 60794-1-21:E1
|
| Installation tensile strength |
2000 N
|
| Installation tensile strength acceptance criteria |
Δα ≤ 0,05 dB after test
|
| Installation tensile strength test method |
IEC 60794-1-21:E1
|
| Crush resistance long term |
2000 N/100mm
|
| Long-term crush resistance acceptance criteria |
Δα ≤ 0,05 dB prior release, no damage
|
| Long-term crush resistance test method |
IEC 60794-1-21:E3A
|
| Short-term crush resistance |
4000 N/100mm
|
| Short-term crush resistance acceptance criteria |
Δα ≤ 0,05 dB after release, no damage
|
| Short-term crush resistance test method |
IEC 60794-1-21:E3A
|
| Impact resistance |
10 Nm, 3 impacts, d=20 mm, R=300 mm
|
| Impact resistance acceptance criteria |
Δα ≤ 0,05 dB after test, no damage
|
| Impact resistance test method |
IEC 60794-1-21:E4
|
| Torsion |
L = 1 m, rotation angle ±180°, 10 cycles
|
| Torsion acceptance criteria |
no damage
|
| Torsion test method |
IEC 60794-1-21:E7
|
| Repeated bending |
R=10 x cable diameter, 25 cycles, m = 4Kg
|
| Repeated bending acceptance criteria |
no damage
|
| Repeated bending test method |
IEC 60794-1-21:E6
|
| Cable bend |
d=20 x cable diameter, 4 turns, 3 cycles
|
| Cable bend acceptance criteria |
Δα ≤ 0,05 dB after test, no damage
|
| Cable bend test method |
IEC 60794-1-21:E11A
|
| Minimum bend radius in service |
100 mm
|
| Minimum bend radius during installation |
140 mm
|
Environmental Characteristics
| Temperature cycling |
-20 °C +70 °C / -4 °F +158 °F
|
| Temperature cycling acceptance criteria |
Δα ≤ 0,05 dB
|
| Temperature cycling test method |
IEC 60794-1-22:F1
|
| Reversible temperature cycling |
-25 °C +70 °C / -13 °F +158 °F
|
| Reversible temperature cycling acceptance criteria |
Δα ≤ 0,15 dB, reversible
|
| Reversible temperature cycling test method |
IEC 60794-1-22:F1
|
| Operation temperature |
-20 °C to +70 °C / -4 °F to +158 °F
|
| Storage / Transport temperature |
-25 °C to +70 °C / -13 °F to +158 °F
|
| Water penetration |
L = 3 m, h = 1 m, 24 h
|
| Water penetration acceptance criteria |
no water leakage
|
| Water penetration test method |
IEC 60794-1-22:F5B
|
| Thermal load |
0.63 MJ/m
|
| Flammability vertical single cable |
Pass
|
| Flammability vertical single cable test method |
IEC 60332-1-2
|
| Smoke density |
Pass
|
| Smoke density test method |
IEC 61034-2
|
| Halogen free, acid gases |
Pass
|
| Halogen free, acid gases test method |
IEC 60754-2
|
| 2015 / 863 / EU - RoHS 3 |
conform
|
