Technical Data
| Cable family code |
IFEF FiRis
|
| Cable type |
Central loose tube cable
|
| Cable version |
Gel-free installation cable
|
| Cable application |
indoor use
|
| CPR classification |
B2ca-s1a,d0,a1
|
| DoP number |
D9082
|
| Fiber type |
OM4
|
| Fiber count |
4
|
| Fiber color coding |
1.-12.: red, green, blue, yellow, white, gray, brown, violet, turquoise, black, orange, pink13.-24.: red, green, blue, yellow, white, gray, brown, violet, turquoise, natural, orange, pink(ring-marked)
|
| Fiber count per tube |
24
|
| Loose tube count |
1
|
| Loose tube diameter |
2.4 mm
|
| Armor |
Rodent protection
|
| Outer sheath thickness |
0.9 mm
|
| Outer sheath material |
FRLSZH
|
| Outer sheath color |
heather violet
|
| Cable outer diameter |
5.4 mm
|
| Cable weight |
32.0 kg/km / 21 lbs/1000ft
|
| DIN / VDE 0888 code |
J-B(ZN)H
|
| CPR test method |
EN 50575, EN 13501-6
|
| Standard put-up length on drum |
2100 m ± 5%
|
| CPR classification |
B2ca
|
Mechanical Data
| Installation tensile strength |
1000 N (5 min.)
|
| Installation tensile strength acceptance criteria |
Δα ≤ 0,05 dB after test
|
| Installation tensile strength test method |
IEC 60794-1-21:E1A
|
| Crush resistance long term |
500 N/100mm (15min)
|
| Long-term crush resistance acceptance criteria |
Δα ≤ 0,05 dB prior release, no damage
|
| Long-term crush resistance test method |
IEC 60794-1-21:E3A
|
| Short-term crush resistance |
1000 N/100mm
|
| Short-term crush resistance acceptance criteria |
Δα ≤ 0,05 dB after release, no damage
|
| Short-term crush resistance test method |
IEC 60794-1-21:E3A
|
| Impact resistance |
5 Nm, 3 impacts, d=20 mm, R=12,5 mm
|
| Impact resistance acceptance criteria |
no fiber breakage
|
| Impact resistance test method |
IEC 60794-1-21:E4
|
| Torsion |
L = 1 m, rotation angle ±180°, 10 cycles, F= 20N
|
| Torsion acceptance criteria |
no fiber breakage
|
| Torsion test method |
IEC 60794-1-21:E7
|
| Kink |
d=20 x cable diameter
|
| Kink acceptance criteria |
no kink
|
| Repeated bending |
R=10 x cable diameter, 25 cycles, m = 4Kg
|
| Repeated bending acceptance criteria |
no damage
|
| Repeated bending test method |
IEC 60794-1-21:E6
|
| Cable bend |
R=20 x cable diameter, 6 turns, 10 cycles
|
| Cable bend acceptance criteria |
no fiber breakage
|
| Cable bend test method |
IEC 60794-1-21:E11A
|
| Minimum bend radius in service |
85 mm
|
| Minimum bend radius during installation |
110 mm
|
Environmental Characteristics
| Temperature cycling |
-20 °C +60 °C / -4 °F +140 °F
|
| Temperature cycling acceptance criteria |
Δα ≤ 0,05 dB
|
| Temperature cycling test method |
IEC 60794-1-22:F1
|
| Reversible temperature cycling |
-25 °C +60 °C / -13 °F +140 °F
|
| Reversible temperature cycling acceptance criteria |
Δα ≤ 0,15 dB, reversible
|
| Reversible temperature cycling test method |
IEC 60794-1-22:F1
|
| Operation temperature |
-20 °C to +60 °C / -4 °F to +140 °F
|
| Storage / Transport temperature |
-25 °C to +60 °C / -13 °F to +140 °F
|
| Thermal load |
0.48 MJ/m
|
